TAIC SERIES
MSDS
Cross-linking Agent (KB-I)
Powder Cross-linking Agent (KB-II)
Home >> Products >> TAIC Series >> MSDS

Material SAFETY DATA SHEET

Restricted Distribution
1.IDENTIFICATION OF THE SUBSTANCE/PREPARATION

Product label name : TAIC(Triallyl isocyanurate)

2. HAZARDS IDENTIFICATION:Harmful if swallowed

 
3. FIRST AID MEASURES

    Symptoms and effect   Harmful if swallowed

    First aid
General  

In all cases of doubt, or when symptoms persist, seek medical 
Attention

Inhalation Not likely to occur, move to fresh air.
Skin Product(hot, molten): Always seek medical attention.
Eye Product(hot, molten): Always seek medical attention.
Ingestion Rinse mouth, Give water to drink. Induce vomiting. Never induce vomiting in unconscious or confused persons. Seek medical advice.
Advice to physician No specific recommendations.
 
4.FIRE-FIGHTING MEASURES
  • Extinguishing media:Waterspray, foam, powder, carbon dioxide. (Does not present a serious fire hazard, If involved in a fire, It will   support combustion)
  • Unsuitable extinguishing:none known
    media.
  • Special exposure hazards:May emit toxic and irritating fumes under fire conditions.
  • Hazardous decomposition/combustion products:Ally alcohol, hydrogen cyanide(HCN)
 
5.ACCIDENTAL RELEASE MEASURES
Personal precaution Avoid contact with eyes.
Environmental precautions Do not allow to enter drains or water courses.
Methods for cleaning up Collect as much as possible in a clean container for (preferable) reuse or disposal.
 
6.HANDLING AND STORAGE
  • Handling:Avoid contact with skin and eyes.When using do not eat, drink or smoke
  • Fire and explosion:No specific recommendation
    Prevention
  • Storage requirements:Stored and transported avoid of high temperature and direct sunlight.
 
7.EXPOSURE CONTROLS/PERSONAL PROTECTION

    Engineering controls:Provide adequate ventilation.

    Personal protection

        Respiratory:Use appropriate certified respirators.
        Hand:Wear suitable rubber gloves.
        Eye:Safety goggles.
        Skin and body:Wear suitable protective clothing.
 
8.PHYSICAL AND CHEMCAL PROPERTIES
Productlabelname TAIC (triallyl isocyanurate)
Appearance Crystal clears (grease)
Shape Colorless liquid
Molecular weight 249.27
Specific gravity 1.155(30℃)
Boiling point/range 144℃/3mmHg  197℃/N2760mmNg
Melting point/range 24-26℃  17-21℃
Flash point 355℃
Viscosity 83±3CP(30℃)
Hue(Pt-Co method) <50
Content ≥98.5%
Acid value <0.3mgKOH/g
Solubility

not dissolved in the water, slightly in paraffin, and completely dissolves in aromatic hydrocarbon, alcohol, acetone, hydrocarbon halide, cyclopenta, hydrocarbon.

 
9.STABILITY AND REACTIVITY
    Stability:Stable when avoiding high temperature and direct sunlight.
    Conditions to avoid:Avoid high temperature and exposure in the sunlight.
    Materials to avoid:No specific recommendations.
    Hazardous decomposition:Allyl alcohol(hydrolysis product), hydrogen cyanide(HCN)
    Products
 

10.TOXICOLOGICAL INFORMATION
    The following data(lab tested) are applicable to the ingredient(s) listed below:
    ·Name:Triallyl isocyanurate
    ·Aouto toxiclty
      Oral LD50:mouse: 660mg/kg (laboratory tested)
    ·Irritation
      Skin:Non- irritation
      Eye:Non-irritation

 
11.DISPOSAL CONSIDERATION
    Product:According to local regulations(most probably controlled incineration).
    Contaminated packaging:According to local regulations.
 
12.REGULATORY INFORMATION
  Product label name Triallyl isocyanurate
  Labeling  
     Annex-1 number Not applicable
     Symbol(s) HARMFUL(Xn)
   
    R(isk) phrase(s) Harmful if swallowed
    S(afety) phrase(s) Wear suitable gloves and eye/face protection
 
hzklhgco
Hangzhou Keli Chemical Co., Ltd.
Copyright(C) 2004 hzkeli.com All Rights Reserved